1 Kings 7:13-33
1 Kings 7:13-33 MSG
King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram’s mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram’s next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal.