1 Kings 7:27-43
1 Kings 7:27-45 The Message (MSG)
Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal. There was a handle at the four corners of each washstand, the handles cast in one piece with the stand. At the top of the washstand there was a ring about nine inches deep. The uprights and handles were cast with the stand. Everything and every available surface was engraved with cherubim, lions, and palm trees, bordered by arabesques. The washstands were identical, all cast in the same mold. He also made ten bronze washbasins, each six feet in diameter with a capacity of 230 gallons, one basin for each of the ten washstands. He arranged five stands on the south side of The Temple and five on the north. The Sea was placed at the southeast corner of The Temple. Hiram then fashioned the various utensils: buckets and shovels and bowls. Hiram completed all the work he set out to do for King Solomon on The Temple of GOD
1 Kings 7:27-43 King James Version (KJV)
And he made ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it. And the work of the bases was on this manner: they had borders, and the borders were between the ledges: and on the borders that were between the ledges were lions, oxen, and cherubims: and upon the ledges there was a base above: and beneath the lions and oxen were certain additions made of thin work. And every base had four brasen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition. And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round. And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit. And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten. And there were four undersetters to the four corners of one base: and the undersetters were of the very base itself. And in the top of the base was there a round compass of half a cubit high: and on the top of the base the ledges thereof and the borders thereof were of the same. For on the plates of the ledges thereof, and on the borders thereof, he graved cherubims, lions, and palm trees, according to the proportion of every one, and additions round about. After this manner he made the ten bases: all of them had one casting, one measure, and one size. Then made he ten lavers of brass: one laver contained forty baths: and every laver was four cubits: and upon every one of the ten bases one laver. And he put five bases on the right side of the house, and five on the left side of the house: and he set the sea on the right side of the house eastward over against the south. And Hiram made the lavers, and the shovels, and the basons. So Hiram made an end of doing all the work that he made king Solomon for the house of the LORD: the two pillars, and the two bowls of the chapiters that were on the top of the two pillars; and the two networks, to cover the two bowls of the chapiters which were upon the top of the pillars; and four hundred pomegranates for the two networks, even two rows of pomegranates for one network, to cover the two bowls of the chapiters that were upon the pillars; and the ten bases, and ten lavers on the bases
1 Kings 7:27-43 New American Standard Bible - NASB 1995 (NASB1995)
Then he made the ten stands of bronze; the length of each stand was four cubits and its width four cubits and its height three cubits. This was the design of the stands: they had borders, even borders between the frames, and on the borders which were between the frames were lions, oxen and cherubim; and on the frames there was a pedestal above, and beneath the lions and oxen were wreaths of hanging work. Now each stand had four bronze wheels with bronze axles, and its four feet had supports; beneath the basin were cast supports with wreaths at each side. Its opening inside the crown at the top was a cubit, and its opening was round like the design of a pedestal, a cubit and a half; and also on its opening there were engravings, and their borders were square, not round. The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half. The workmanship of the wheels was like the workmanship of a chariot wheel. Their axles, their rims, their spokes, and their hubs were all cast. Now there were four supports at the four corners of each stand; its supports were part of the stand itself. On the top of the stand there was a circular form half a cubit high, and on the top of the stand its stays and its borders were part of it. He engraved on the plates of its stays and on its borders, cherubim, lions and palm trees, according to the clear space on each, with wreaths all around. He made the ten stands like this: all of them had one casting, one measure and one form. He made ten basins of bronze, one basin held forty baths; each basin was four cubits, and on each of the ten stands was one basin. Then he set the stands, five on the right side of the house and five on the left side of the house; and he set the sea of cast metal on the right side of the house eastward toward the south. Now Hiram made the basins and the shovels and the bowls. So Hiram finished doing all the work which he performed for King Solomon in the house of the LORD: the two pillars and the two bowls of the capitals which were on the top of the two pillars, and the two networks to cover the two bowls of the capitals which were on the top of the pillars; and the four hundred pomegranates for the two networks, two rows of pomegranates for each network to cover the two bowls of the capitals which were on the tops of the pillars; and the ten stands with the ten basins on the stands
1 Kings 7:27-43 New Century Version (NCV)
Then Huram made ten bronze stands, each one six feet long, six feet wide, and four and one-half feet high. The stands were made from square sides, which were put on frames. On the sides were bronze lions, bulls, and creatures with wings. On the frames above and below the lions and bulls were designs of flowers hammered into the bronze. Each stand had four bronze wheels with bronze axles. At the corners there were bronze supports for a large bowl, and the supports had designs of flowers. There was a frame on top of the bowls, eighteen inches high above the bowls. The opening of the bowl was round, twenty-seven inches deep. Designs were carved into the bronze on the frame, which was square, not round. The four wheels, placed under the frame, were twenty-seven inches high. The axles between the wheels were made as one piece with the stand. The wheels were like a chariot’s wheels. Everything on the wheels—the axles, rims, spokes, and hubs—were made of bronze. The four supports were on the four corners of each stand. They were made as one piece with the stand. A strip of bronze around the top of each stand was nine inches deep. It was also made as one piece with the stand. The sides of the stand and the frames were covered with carvings of creatures with wings, as well as lions, palm trees, and flowers. This is the way Huram made the ten stands. The bronze for each stand was melted and poured into a mold, so all the stands were the same size and shape. Huram also made ten bronze bowls, one bowl for each of the ten stands. Each bowl was six feet across and could hold about two hundred thirty gallons. Huram put five stands on the south side of the Temple and five on the north side. He put the large bowl in the southeast corner of the Temple. Huram also made bowls, shovels, and small bowls. So Huram finished all his work for King Solomon on the Temple of the LORD: two pillars; two large bowls for the capitals on top of the pillars; two nets to cover the two large bowls for the capitals on top of the pillars; four hundred pomegranates for the two nets (there were two rows of pomegranates for each net covering the bowls for the capitals on top of the pillars); ten stands with a bowl on each stand
1 Kings 7:27-43 American Standard Version (ASV)
And he made the ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it. And the work of the bases was on this manner: they had panels; and there were panels between the ledges; and on the panels that were between the ledges were lions, oxen, and cherubim; and upon the ledges there was a pedestal above; and beneath the lions and oxen were wreaths of hanging work. And every base had four brazen wheels, and axles of brass; and the four feet thereof had undersetters: beneath the laver were the undersetters molten, with wreaths at the side of each. And the mouth of it within the capital and above was a cubit: and the mouth thereof was round after the work of a pedestal, a cubit and a half; and also upon the mouth of it were gravings, and their panels were foursquare, not round. And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit. And the work of the wheels was like the work of a chariot wheel: their axletrees, and their felloes, and their spokes, and their naves, were all molten. And there were four undersetters at the four corners of each base: the undersetters thereof were of the base itself. And in the top of the base was there a round compass half a cubit high; and on the top of the base the stays thereof and the panels thereof were of the same. And on the plates of the stays thereof, and on the panels thereof, he graved cherubim, lions, and palm-trees, according to the space of each, with wreaths round about. After this manner he made the ten bases: all of them had one casting, one measure, and one form. And he made ten lavers of brass: one laver contained forty baths; and every laver was four cubits; and upon every one of the ten bases one laver. And he set the bases, five on the right side of the house, and five on the left side of the house: and he set the sea on the right side of the house eastward, toward the south. And Hiram made the lavers, and the shovels, and the basins. So Hiram made an end of doing all the work that he wrought for king Solomon in the house of Jehovah: the two pillars, and the two bowls of the capitals that were on the top of the pillars; and the two networks to cover the two bowls of the capitals that were on the top of the pillars; and the four hundred pomegranates for the two networks; two rows of pomegranates for each network, to cover the two bowls of the capitals that were upon the pillars; and the ten bases, and the ten lavers on the bases
1 Kings 7:27-43 New International Version (NIV)
He also made ten movable stands of bronze; each was four cubits long, four wide and three high. This is how the stands were made: They had side panels attached to uprights. On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work. Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round. The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half. The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal. Each stand had four handles, one on each corner, projecting from the stand. At the top of the stand there was a circular band half a cubit deep. The supports and panels were attached to the top of the stand. He engraved cherubim, lions and palm trees on the surfaces of the supports and on the panels, in every available space, with wreaths all around. This is the way he made the ten stands. They were all cast in the same molds and were identical in size and shape. He then made ten bronze basins, each holding forty baths and measuring four cubits across, one basin to go on each of the ten stands. He placed five of the stands on the south side of the temple and five on the north. He placed the Sea on the south side, at the southeast corner of the temple. He also made the pots and shovels and sprinkling bowls. So Huram finished all the work he had undertaken for King Solomon in the temple of the LORD: the two pillars; the two bowl-shaped capitals on top of the pillars; the two sets of network decorating the two bowl-shaped capitals on top of the pillars; the four hundred pomegranates for the two sets of network (two rows of pomegranates for each network decorating the bowl-shaped capitals on top of the pillars); the ten stands with their ten basins
1 Kings 7:27-43 New King James Version (NKJV)
He also made ten carts of bronze; four cubits was the length of each cart, four cubits its width, and three cubits its height. And this was the design of the carts: They had panels, and the panels were between frames; on the panels that were between the frames were lions, oxen, and cherubim. And on the frames was a pedestal on top. Below the lions and oxen were wreaths of plaited work. Every cart had four bronze wheels and axles of bronze, and its four feet had supports. Under the laver were supports of cast bronze beside each wreath. Its opening inside the crown at the top was one cubit in diameter; and the opening was round, shaped like a pedestal, one and a half cubits in outside diameter; and also on the opening were engravings, but the panels were square, not round. Under the panels were the four wheels, and the axles of the wheels were joined to the cart. The height of a wheel was one and a half cubits. The workmanship of the wheels was like the workmanship of a chariot wheel; their axle pins, their rims, their spokes, and their hubs were all of cast bronze. And there were four supports at the four corners of each cart; its supports were part of the cart itself. On the top of the cart, at the height of half a cubit, it was perfectly round. And on the top of the cart, its flanges and its panels were of the same casting. On the plates of its flanges and on its panels he engraved cherubim, lions, and palm trees, wherever there was a clear space on each, with wreaths all around. Thus he made the ten carts. All of them were of the same mold, one measure, and one shape. Then he made ten lavers of bronze; each laver contained forty baths, and each laver was four cubits. On each of the ten carts was a laver. And he put five carts on the right side of the house, and five on the left side of the house. He set the Sea on the right side of the house, toward the southeast. Huram made the lavers and the shovels and the bowls. So Huram finished doing all the work that he was to do for King Solomon for the house of the LORD: the two pillars, the two bowl-shaped capitals that were on top of the two pillars; the two networks covering the two bowl-shaped capitals which were on top of the pillars; four hundred pomegranates for the two networks (two rows of pomegranates for each network, to cover the two bowl-shaped capitals that were on top of the pillars); the ten carts, and ten lavers on the carts
1 Kings 7:27-43 Amplified Bible (AMP)
Then Hiram made ten bronze stands [for smaller basins]; the length of each stand was four cubits, its width was four cubits and its height was three cubits. This was the design of the stands: they had borders between the frames. On the borders between the frames were lions, oxen, and cherubim; and on the frames there was a pedestal above. Beneath the lions and oxen were borders of hanging work. Now each stand had four bronze wheels with bronze axles, and its four feet had supports [for a basin]. Beneath the basin were cast supports with borders at each side. Its opening inside the crown at the top measured a cubit, and its opening was round like the design of a pedestal, a cubit and a half. Also on its opening were carvings, and their borders were square, not round. Underneath the borders were four wheels, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half. The wheels were made like a chariot wheel: their axles, their rims, their spokes, and their hubs were all cast. Now there were four supports at the four corners of each stand; the supports were part of the stand itself. On the top of the stand there was a circular piece half a cubit high, and on the top of the stand its supports and borders were part of it. And on the surface of its supports and its borders Hiram engraved cherubim, lions, and palm-shaped decorations, according to the [available] space for each, with borders all around. He made the ten stands like this: they all had one casting, one measure, and one form. Then he made ten basins of bronze; each basin held forty baths and was four cubits, and there was one basin on each of the ten stands. Then he placed the bases, five on the right [or south] side of the house and five on the left [or north] side; and he set the Sea [of cast metal] on the right side of the house toward the southeast. Now Hiram made the basins and the shovels and the bowls. So Hiram finished all the work which he did for King Solomon on the house of the LORD: the two pillars and the [two] bowls of the capitals which were on the top of the two pillars, and the two networks to cover the two bowls of the capitals which were on top of the pillars; and the four hundred pomegranates for the two networks, two rows of pomegranates for each network to cover the two bowls of the capitals that were on the tops of the pillars; the ten stands and the ten basins on the stands
1 Kings 7:27-43 New Living Translation (NLT)
Huram also made ten bronze water carts, each 6 feet long, 6 feet wide, and 4-1/2 feet tall. They were constructed with side panels braced with crossbars. Both the panels and the crossbars were decorated with carved lions, oxen, and cherubim. Above and below the lions and oxen were wreath decorations. Each of these carts had four bronze wheels and bronze axles. There were supporting posts for the bronze basins at the corners of the carts; these supports were decorated on each side with carvings of wreaths. The top of each cart had a rounded frame for the basin. It projected 1-1/2 feet above the cart’s top like a round pedestal, and its opening was 2-1/4 feet across; it was decorated on the outside with carvings of wreaths. The panels of the carts were square, not round. Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2-1/4 feet in diameter and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze. There were handles at each of the four corners of the carts, and these, too, were cast as one unit with the cart. Around the top of each cart was a rim nine inches wide. The corner supports and side panels were cast as one unit with the cart. Carvings of cherubim, lions, and palm trees decorated the panels and corner supports wherever there was room, and there were wreaths all around. All ten water carts were the same size and were made alike, for each was cast from the same mold. Huram also made ten smaller bronze basins, one for each cart. Each basin was six feet across and could hold 220 gallons of water. He set five water carts on the south side of the Temple and five on the north side. The great bronze basin called the Sea was placed near the southeast corner of the Temple. He also made the necessary washbasins, shovels, and bowls. So at last Huram completed everything King Solomon had assigned him to make for the Temple of the LORD: the two pillars; the two bowl-shaped capitals on top of the pillars; the two networks of interwoven chains that decorated the capitals; the 400 pomegranates that hung from the chains on the capitals (two rows of pomegranates for each of the chain networks that decorated the capitals on top of the pillars); the ten water carts holding the ten basins
1 Kings 7:27-43 English Standard Version 2016 (ESV)
He also made the ten stands of bronze. Each stand was four cubits long, four cubits wide, and three cubits high. This was the construction of the stands: they had panels, and the panels were set in the frames, and on the panels that were set in the frames were lions, oxen, and cherubim. On the frames, both above and below the lions and oxen, there were wreaths of beveled work. Moreover, each stand had four bronze wheels and axles of bronze, and at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. Its opening was within a crown that projected upward one cubit. Its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings, and its panels were square, not round. And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half. The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast. There were four supports at the four corners of each stand. The supports were of one piece with the stands. And on the top of the stand there was a round band half a cubit high; and on the top of the stand its stays and its panels were of one piece with it. And on the surfaces of its stays and on its panels, he carved cherubim, lions, and palm trees, according to the space of each, with wreaths all around. After this manner he made the ten stands. All of them were cast alike, of the same measure and the same form. And he made ten basins of bronze. Each basin held forty baths, each basin measured four cubits, and there was a basin for each of the ten stands. And he set the stands, five on the south side of the house, and five on the north side of the house. And he set the sea at the southeast corner of the house. Hiram also made the pots, the shovels, and the basins. So Hiram finished all the work that he did for King Solomon on the house of the LORD: the two pillars, the two bowls of the capitals that were on the tops of the pillars, and the two latticeworks to cover the two bowls of the capitals that were on the tops of the pillars; and the four hundred pomegranates for the two latticeworks, two rows of pomegranates for each latticework, to cover the two bowls of the capitals that were on the pillars; the ten stands, and the ten basins on the stands