1 Kings 7:13-33

Share

1 Kings 7:13-33 The Message (MSG)

King Solomon sent to Tyre and asked Hiram (not the king; another Hiram) to come. Hiram’s mother was a widow from the tribe of Naphtali. His father was a Tyrian and a master worker in bronze. Hiram was a real artist—he could do anything with bronze. He came to King Solomon and did all the bronze work. First he cast two pillars in bronze, each twenty-seven feet tall and eighteen feet in circumference. He then cast two capitals in bronze to set on the pillars; each capital was seven and a half feet high and flared at the top in the shape of a lily. Each capital was dressed with an elaborate filigree of seven braided chains and a double row of two hundred pomegranates, setting the pillars off magnificently. He set the pillars up in the entrance porch to The Temple; the pillar to the south he named Security (Jachin) and the pillar to the north Stability (Boaz). The capitals were in the shape of lilies. When the pillars were finished, Hiram’s next project was to make the Sea—an immense round basin of cast metal fifteen feet in diameter, seven and a half feet tall, and forty-five feet in circumference. Just under the rim there were two bands of decorative gourds, ten gourds to each foot and a half. The gourds were cast in one piece with the Sea. The Sea was set on twelve bulls, three facing north, three facing west, three facing south, and three facing east; the bulls faced outward supporting the Sea on their hindquarters. The Sea was three inches thick and flared at the rim like a cup, or like a lily. It held about 11,500 gallons. Hiram also made ten washstands of bronze. Each was six feet square and four and a half feet tall. They were made like this: Panels were fastened to the uprights. Lions, bulls, and cherubim were represented on the panels and uprights. Beveled wreath-work bordered the lions and bulls above and below. Each stand was mounted on four bronze wheels with bronze axles. The uprights were cast with decorative relief work. Each stand held a basin on a circular engraved support a foot and a half deep set on a pedestal two and a quarter feet square. The washstand itself was square. The axles were attached under the stand and the wheels fixed to them. The wheels were twenty-seven inches in diameter; they were designed like chariot wheels. Everything—axles, rims, spokes, and hubs—was of cast metal.

1 Kings 7:13-33 King James Version (KJV)

And king Solomon sent and fetched Hiram out of Tyre. He was a widow's son of the tribe of Naphtali, and his father was a man of Tyre, a worker in brass: and he was filled with wisdom, and understanding, and cunning to work all works in brass. And he came to king Solomon, and wrought all his work. For he cast two pillars of brass, of eighteen cubits high apiece: and a line of twelve cubits did compass either of them about. And he made two chapiters of molten brass, to set upon the tops of the pillars: the height of the one chapiter was five cubits, and the height of the other chapiter was five cubits: and nets of checker work, and wreaths of chain work, for the chapiters which were upon the top of the pillars; seven for the one chapiter, and seven for the other chapiter. And he made the pillars, and two rows round about upon the one network, to cover the chapiters that were upon the top, with pomegranates: and so did he for the other chapiter. And the chapiters that were upon the top of the pillars were of lily work in the porch, four cubits. And the chapiters upon the two pillars had pomegranates also above, over against the belly which was by the network: and the pomegranates were two hundred in rows round about upon the other chapiter. And he set up the pillars in the porch of the temple: and he set up the right pillar, and called the name thereof Jachin: and he set up the left pillar, and called the name thereof Boaz. And upon the top of the pillars was lily work: so was the work of the pillars finished. And he made a molten sea, ten cubits from the one brim to the other: it was round all about, and his height was five cubits: and a line of thirty cubits did compass it round about. And under the brim of it round about there were knops compassing it, ten in a cubit, compassing the sea round about: the knops were cast in two rows, when it was cast. It stood upon twelve oxen, three looking toward the north, and three looking toward the west, and three looking toward the south, and three looking toward the east: and the sea was set above upon them, and all their hinder parts were inward. And it was an hand breadth thick, and the brim thereof was wrought like the brim of a cup, with flowers of lilies: it contained two thousand baths. And he made ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it. And the work of the bases was on this manner: they had borders, and the borders were between the ledges: and on the borders that were between the ledges were lions, oxen, and cherubims: and upon the ledges there was a base above: and beneath the lions and oxen were certain additions made of thin work. And every base had four brasen wheels, and plates of brass: and the four corners thereof had undersetters: under the laver were undersetters molten, at the side of every addition. And the mouth of it within the chapiter and above was a cubit: but the mouth thereof was round after the work of the base, a cubit and an half: and also upon the mouth of it were gravings with their borders, foursquare, not round. And under the borders were four wheels; and the axletrees of the wheels were joined to the base: and the height of a wheel was a cubit and half a cubit. And the work of the wheels was like the work of a chariot wheel: their axletrees, and their naves, and their felloes, and their spokes, were all molten.

1 Kings 7:13-33 New American Standard Bible - NASB 1995 (NASB1995)

Now King Solomon sent and brought Hiram from Tyre. He was a widow’s son from the tribe of Naphtali, and his father was a man of Tyre, a worker in bronze; and he was filled with wisdom and understanding and skill for doing any work in bronze. So he came to King Solomon and performed all his work. He fashioned the two pillars of bronze; eighteen cubits was the height of one pillar, and a line of twelve cubits measured the circumference of both. He also made two capitals of molten bronze to set on the tops of the pillars; the height of the one capital was five cubits and the height of the other capital was five cubits. There were nets of network and twisted threads of chainwork for the capitals which were on the top of the pillars; seven for the one capital and seven for the other capital. So he made the pillars, and two rows around on the one network to cover the capitals which were on the top of the pomegranates; and so he did for the other capital. The capitals which were on the top of the pillars in the porch were of lily design, four cubits. There were capitals on the two pillars, even above and close to the rounded projection which was beside the network; and the pomegranates numbered two hundred in rows around both capitals. Thus he set up the pillars at the porch of the nave; and he set up the right pillar and named it Jachin, and he set up the left pillar and named it Boaz. On the top of the pillars was lily design. So the work of the pillars was finished. Now he made the sea of cast metal ten cubits from brim to brim, circular in form, and its height was five cubits, and thirty cubits in circumference. Under its brim gourds went around encircling it ten to a cubit, completely surrounding the sea; the gourds were in two rows, cast with the rest. It stood on twelve oxen, three facing north, three facing west, three facing south, and three facing east; and the sea was set on top of them, and all their rear parts turned inward. It was a handbreadth thick, and its brim was made like the brim of a cup, as a lily blossom; it could hold two thousand baths. Then he made the ten stands of bronze; the length of each stand was four cubits and its width four cubits and its height three cubits. This was the design of the stands: they had borders, even borders between the frames, and on the borders which were between the frames were lions, oxen and cherubim; and on the frames there was a pedestal above, and beneath the lions and oxen were wreaths of hanging work. Now each stand had four bronze wheels with bronze axles, and its four feet had supports; beneath the basin were cast supports with wreaths at each side. Its opening inside the crown at the top was a cubit, and its opening was round like the design of a pedestal, a cubit and a half; and also on its opening there were engravings, and their borders were square, not round. The four wheels were underneath the borders, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half. The workmanship of the wheels was like the workmanship of a chariot wheel. Their axles, their rims, their spokes, and their hubs were all cast.

1 Kings 7:13-33 New Century Version (NCV)

King Solomon sent to Tyre and had Huram brought to him. Huram’s mother was a widow from the tribe of Naphtali. His father was from Tyre and had been skilled in making things from bronze. Huram was also very skilled and experienced in bronze work. So he came to King Solomon and did all the bronze work. He made two bronze pillars, each one twenty-seven feet tall and eighteen feet around. He also made two bronze capitals that were seven and one-half feet tall, and he put them on top of the pillars. Then he made a net of seven chains for each capital, which covered the capitals on top of the two pillars. He made two rows of bronze pomegranates to go on the nets. These covered the capitals at the top of the pillars. The capitals on top of the pillars in the porch were shaped like lilies, and they were six feet tall. The capitals were on top of both pillars, above the bowl-shaped section and next to the nets. At that place there were two hundred pomegranates in rows all around the capitals. Huram put these two bronze pillars at the porch of the Temple. He named the south pillar He Establishes and the north pillar In Him Is Strength. The capitals on top of the pillars were shaped like lilies. So the work on the pillars was finished. Then Huram made from bronze a large round bowl, which was called the Sea. It was forty-five feet around, fifteen feet across, and seven and one-half feet deep. Around the outer edge of the bowl was a rim. Under this rim were two rows of bronze plants which surrounded the bowl. There were ten plants every eighteen inches, and these plants were made in one piece with the bowl. The bowl rested on the backs of twelve bronze bulls that faced outward from the center of the bowl. Three bulls faced north, three faced west, three faced south, and three faced east. The sides of the bowl were four inches thick, and it held about eleven thousand gallons. The rim of the bowl was like the rim of a cup or like a lily blossom. Then Huram made ten bronze stands, each one six feet long, six feet wide, and four and one-half feet high. The stands were made from square sides, which were put on frames. On the sides were bronze lions, bulls, and creatures with wings. On the frames above and below the lions and bulls were designs of flowers hammered into the bronze. Each stand had four bronze wheels with bronze axles. At the corners there were bronze supports for a large bowl, and the supports had designs of flowers. There was a frame on top of the bowls, eighteen inches high above the bowls. The opening of the bowl was round, twenty-seven inches deep. Designs were carved into the bronze on the frame, which was square, not round. The four wheels, placed under the frame, were twenty-seven inches high. The axles between the wheels were made as one piece with the stand. The wheels were like a chariot’s wheels. Everything on the wheels—the axles, rims, spokes, and hubs—were made of bronze.

1 Kings 7:13-33 American Standard Version (ASV)

And king Solomon sent and fetched Hiram out of Tyre. He was the son of a widow of the tribe of Naphtali, and his father was a man of Tyre, a worker in brass; and he was filled with wisdom and understanding and skill, to work all works in brass. And he came to king Solomon, and wrought all his work. For he fashioned the two pillars of brass, eighteen cubits high apiece: and a line of twelve cubits compassed either of them about. And he made two capitals of molten brass, to set upon the tops of the pillars: the height of the one capital was five cubits, and the height of the other capital was five cubits. There were nets of checker-work, and wreaths of chain-work, for the capitals which were upon the top of the pillars; seven for the one capital, and seven for the other capital. So he made the pillars; and there were two rows round about upon the one network, to cover the capitals that were upon the top of the pillars: and so did he for the other capital. And the capitals that were upon the top of the pillars in the porch were of lily-work, four cubits. And there were capitals above also upon the two pillars, close by the belly which was beside the network: and the pomegranates were two hundred, in rows round about upon the other capital. And he set up the pillars at the porch of the temple: and he set up the right pillar, and called the name thereof Jachin; and he set up the left pillar, and called the name thereof Boaz. And upon the top of the pillars was lily-work: so was the work of the pillars finished. And he made the molten sea of ten cubits from brim to brim, round in compass, and the height thereof was five cubits; and a line of thirty cubits compassed it round about. And under the brim of it round about there were knops which did compass it, for ten cubits, compassing the sea round about: the knops were in two rows, cast when it was cast. It stood upon twelve oxen, three looking toward the north, and three looking toward the west, and three looking toward the south, and three looking toward the east; and the sea was set upon them above, and all their hinder parts were inward. And it was a handbreadth thick: and the brim thereof was wrought like the brim of a cup, like the flower of a lily: it held two thousand baths. And he made the ten bases of brass; four cubits was the length of one base, and four cubits the breadth thereof, and three cubits the height of it. And the work of the bases was on this manner: they had panels; and there were panels between the ledges; and on the panels that were between the ledges were lions, oxen, and cherubim; and upon the ledges there was a pedestal above; and beneath the lions and oxen were wreaths of hanging work. And every base had four brazen wheels, and axles of brass; and the four feet thereof had undersetters: beneath the laver were the undersetters molten, with wreaths at the side of each. And the mouth of it within the capital and above was a cubit: and the mouth thereof was round after the work of a pedestal, a cubit and a half; and also upon the mouth of it were gravings, and their panels were foursquare, not round. And the four wheels were underneath the panels; and the axletrees of the wheels were in the base: and the height of a wheel was a cubit and half a cubit. And the work of the wheels was like the work of a chariot wheel: their axletrees, and their felloes, and their spokes, and their naves, were all molten.

1 Kings 7:13-33 New International Version (NIV)

King Solomon sent to Tyre and brought Huram, whose mother was a widow from the tribe of Naphtali and whose father was from Tyre and a skilled craftsman in bronze. Huram was filled with wisdom, with understanding and with knowledge to do all kinds of bronze work. He came to King Solomon and did all the work assigned to him. He cast two bronze pillars, each eighteen cubits high and twelve cubits in circumference. He also made two capitals of cast bronze to set on the tops of the pillars; each capital was five cubits high. A network of interwoven chains adorned the capitals on top of the pillars, seven for each capital. He made pomegranates in two rows encircling each network to decorate the capitals on top of the pillars. He did the same for each capital. The capitals on top of the pillars in the portico were in the shape of lilies, four cubits high. On the capitals of both pillars, above the bowl-shaped part next to the network, were the two hundred pomegranates in rows all around. He erected the pillars at the portico of the temple. The pillar to the south he named Jakin and the one to the north Boaz. The capitals on top were in the shape of lilies. And so the work on the pillars was completed. He made the Sea of cast metal, circular in shape, measuring ten cubits from rim to rim and five cubits high. It took a line of thirty cubits to measure around it. Below the rim, gourds encircled it—ten to a cubit. The gourds were cast in two rows in one piece with the Sea. The Sea stood on twelve bulls, three facing north, three facing west, three facing south and three facing east. The Sea rested on top of them, and their hindquarters were toward the center. It was a handbreadth in thickness, and its rim was like the rim of a cup, like a lily blossom. It held two thousand baths. He also made ten movable stands of bronze; each was four cubits long, four wide and three high. This is how the stands were made: They had side panels attached to uprights. On the panels between the uprights were lions, bulls and cherubim—and on the uprights as well. Above and below the lions and bulls were wreaths of hammered work. Each stand had four bronze wheels with bronze axles, and each had a basin resting on four supports, cast with wreaths on each side. On the inside of the stand there was an opening that had a circular frame one cubit deep. This opening was round, and with its basework it measured a cubit and a half. Around its opening there was engraving. The panels of the stands were square, not round. The four wheels were under the panels, and the axles of the wheels were attached to the stand. The diameter of each wheel was a cubit and a half. The wheels were made like chariot wheels; the axles, rims, spokes and hubs were all of cast metal.

1 Kings 7:13-33 New King James Version (NKJV)

Now King Solomon sent and brought Huram from Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a man of Tyre, a bronze worker; he was filled with wisdom and understanding and skill in working with all kinds of bronze work. So he came to King Solomon and did all his work. And he cast two pillars of bronze, each one eighteen cubits high, and a line of twelve cubits measured the circumference of each. Then he made two capitals of cast bronze, to set on the tops of the pillars. The height of one capital was five cubits, and the height of the other capital was five cubits. He made a lattice network, with wreaths of chainwork, for the capitals which were on top of the pillars: seven chains for one capital and seven for the other capital. So he made the pillars, and two rows of pomegranates above the network all around to cover the capitals that were on top; and thus he did for the other capital. The capitals which were on top of the pillars in the hall were in the shape of lilies, four cubits. The capitals on the two pillars also had pomegranates above, by the convex surface which was next to the network; and there were two hundred such pomegranates in rows on each of the capitals all around. Then he set up the pillars by the vestibule of the temple; he set up the pillar on the right and called its name Jachin, and he set up the pillar on the left and called its name Boaz. The tops of the pillars were in the shape of lilies. So the work of the pillars was finished. And he made the Sea of cast bronze, ten cubits from one brim to the other; it was completely round. Its height was five cubits, and a line of thirty cubits measured its circumference. Below its brim were ornamental buds encircling it all around, ten to a cubit, all the way around the Sea. The ornamental buds were cast in two rows when it was cast. It stood on twelve oxen: three looking toward the north, three looking toward the west, three looking toward the south, and three looking toward the east; the Sea was set upon them, and all their back parts pointed inward. It was a handbreadth thick; and its brim was shaped like the brim of a cup, like a lily blossom. It contained two thousand baths. He also made ten carts of bronze; four cubits was the length of each cart, four cubits its width, and three cubits its height. And this was the design of the carts: They had panels, and the panels were between frames; on the panels that were between the frames were lions, oxen, and cherubim. And on the frames was a pedestal on top. Below the lions and oxen were wreaths of plaited work. Every cart had four bronze wheels and axles of bronze, and its four feet had supports. Under the laver were supports of cast bronze beside each wreath. Its opening inside the crown at the top was one cubit in diameter; and the opening was round, shaped like a pedestal, one and a half cubits in outside diameter; and also on the opening were engravings, but the panels were square, not round. Under the panels were the four wheels, and the axles of the wheels were joined to the cart. The height of a wheel was one and a half cubits. The workmanship of the wheels was like the workmanship of a chariot wheel; their axle pins, their rims, their spokes, and their hubs were all of cast bronze.

1 Kings 7:13-33 Amplified Bible (AMP)

Now King Solomon sent word and brought Hiram [a skilled craftsman] from Tyre. He was the son of a widow from the tribe of Naphtali, and his father was a man of Tyre, a craftsman in bronze. Hiram was filled with wisdom, understanding, and skill for doing any [kind of] work in bronze. So he came to King Solomon and did all his [bronze] work. He cast the two pillars of bronze; the one pillar was eighteen cubits high, and a [measuring] line of twelve cubits measured the circumference of both. He also made two capitals (crowns) of cast bronze to put on the tops of the pillars; the height of one capital was five cubits, and the height of the other capital was five cubits. There were nets of network (lattice-work) and twisted threads (wreaths) of chainwork for the capitals which were on the tops of the pillars, seven for one capital and seven for the other. So Hiram made the pillars [in this manner], and two rows around on the one network to cover the capitals which were on the top of the pomegranates; and he did the same for the other capital. The capitals which were upon the top of the pillars in the porch were of lily work (design), four cubits. The capitals were on the two pillars and also above and close to the rounded projection which was beside the network. There were two hundred pomegranates in rows around both capitals. Hiram set up the pillars at the porch of the temple; he set up the right pillar and named it Jachin (may he establish), and he set up the left pillar and named it Boaz (in it is strength). On the tops of the pillars was lily work (design). So the work of the pillars was finished. Now he made the Sea (basin) of cast metal, ten cubits from brim to brim, circular in form, five cubits high and thirty cubits in circumference. [Ex 30:17-21; 2 Chr 4:6] Under its brim were gourds encircling it ten to a cubit, completely surrounding the Sea; the gourds were in two rows, cast in one piece with it. It stood on twelve oxen, three facing north, three west, three south, and three east; the Sea was set on top of them, and all their rear parts pointed inward. It was a hand width thick, and its brim was made like the brim of a cup, like a lily blossom. It held two thousand baths. Then Hiram made ten bronze stands [for smaller basins]; the length of each stand was four cubits, its width was four cubits and its height was three cubits. This was the design of the stands: they had borders between the frames. On the borders between the frames were lions, oxen, and cherubim; and on the frames there was a pedestal above. Beneath the lions and oxen were borders of hanging work. Now each stand had four bronze wheels with bronze axles, and its four feet had supports [for a basin]. Beneath the basin were cast supports with borders at each side. Its opening inside the crown at the top measured a cubit, and its opening was round like the design of a pedestal, a cubit and a half. Also on its opening were carvings, and their borders were square, not round. Underneath the borders were four wheels, and the axles of the wheels were on the stand. And the height of a wheel was a cubit and a half. The wheels were made like a chariot wheel: their axles, their rims, their spokes, and their hubs were all cast.

1 Kings 7:13-33 New Living Translation (NLT)

King Solomon then asked for a man named Huram to come from Tyre. He was half Israelite, since his mother was a widow from the tribe of Naphtali, and his father had been a craftsman in bronze from Tyre. Huram was extremely skillful and talented in any work in bronze, and he came to do all the metal work for King Solomon. Huram cast two bronze pillars, each 27 feet tall and 18 feet in circumference. For the tops of the pillars he cast bronze capitals, each 7-1/2 feet tall. Each capital was decorated with seven sets of latticework and interwoven chains. He also encircled the latticework with two rows of pomegranates to decorate the capitals over the pillars. The capitals on the columns inside the entry room were shaped like water lilies, and they were six feet tall. The capitals on the two pillars had 200 pomegranates in two rows around them, beside the rounded surface next to the latticework. Huram set the pillars at the entrance of the Temple, one toward the south and one toward the north. He named the one on the south Jakin, and the one on the north Boaz. The capitals on the pillars were shaped like water lilies. And so the work on the pillars was finished. Then Huram cast a great round basin, 15 feet across from rim to rim, called the Sea. It was 7-1/2 feet deep and about 45 feet in circumference. It was encircled just below its rim by two rows of decorative gourds. There were about six gourds per foot all the way around, and they were cast as part of the basin. The Sea was placed on a base of twelve bronze oxen, all facing outward. Three faced north, three faced west, three faced south, and three faced east, and the Sea rested on them. The walls of the Sea were about three inches thick, and its rim flared out like a cup and resembled a water lily blossom. It could hold about 11,000 gallons of water. Huram also made ten bronze water carts, each 6 feet long, 6 feet wide, and 4-1/2 feet tall. They were constructed with side panels braced with crossbars. Both the panels and the crossbars were decorated with carved lions, oxen, and cherubim. Above and below the lions and oxen were wreath decorations. Each of these carts had four bronze wheels and bronze axles. There were supporting posts for the bronze basins at the corners of the carts; these supports were decorated on each side with carvings of wreaths. The top of each cart had a rounded frame for the basin. It projected 1-1/2 feet above the cart’s top like a round pedestal, and its opening was 2-1/4 feet across; it was decorated on the outside with carvings of wreaths. The panels of the carts were square, not round. Under the panels were four wheels that were connected to axles that had been cast as one unit with the cart. The wheels were 2-1/4 feet in diameter and were similar to chariot wheels. The axles, spokes, rims, and hubs were all cast from molten bronze.

1 Kings 7:13-33 English Standard Version 2016 (ESV)

And King Solomon sent and brought Hiram from Tyre. He was the son of a widow of the tribe of Naphtali, and his father was a man of Tyre, a worker in bronze. And he was full of wisdom, understanding, and skill for making any work in bronze. He came to King Solomon and did all his work. He cast two pillars of bronze. Eighteen cubits was the height of one pillar, and a line of twelve cubits measured its circumference. It was hollow, and its thickness was four fingers. The second pillar was the same. He also made two capitals of cast bronze to set on the tops of the pillars. The height of the one capital was five cubits, and the height of the other capital was five cubits. There were lattices of checker work with wreaths of chain work for the capitals on the tops of the pillars, a lattice for the one capital and a lattice for the other capital. Likewise he made pomegranates in two rows around the one latticework to cover the capital that was on the top of the pillar, and he did the same with the other capital. Now the capitals that were on the tops of the pillars in the vestibule were of lily-work, four cubits. The capitals were on the two pillars and also above the rounded projection which was beside the latticework. There were two hundred pomegranates in two rows all around, and so with the other capital. He set up the pillars at the vestibule of the temple. He set up the pillar on the south and called its name Jachin, and he set up the pillar on the north and called its name Boaz. And on the tops of the pillars was lily-work. Thus the work of the pillars was finished. Then he made the sea of cast metal. It was round, ten cubits from brim to brim, and five cubits high, and a line of thirty cubits measured its circumference. Under its brim were gourds, for ten cubits, compassing the sea all around. The gourds were in two rows, cast with it when it was cast. It stood on twelve oxen, three facing north, three facing west, three facing south, and three facing east. The sea was set on them, and all their rear parts were inward. Its thickness was a handbreadth, and its brim was made like the brim of a cup, like the flower of a lily. It held two thousand baths. He also made the ten stands of bronze. Each stand was four cubits long, four cubits wide, and three cubits high. This was the construction of the stands: they had panels, and the panels were set in the frames, and on the panels that were set in the frames were lions, oxen, and cherubim. On the frames, both above and below the lions and oxen, there were wreaths of beveled work. Moreover, each stand had four bronze wheels and axles of bronze, and at the four corners were supports for a basin. The supports were cast with wreaths at the side of each. Its opening was within a crown that projected upward one cubit. Its opening was round, as a pedestal is made, a cubit and a half deep. At its opening there were carvings, and its panels were square, not round. And the four wheels were underneath the panels. The axles of the wheels were of one piece with the stands, and the height of a wheel was a cubit and a half. The wheels were made like a chariot wheel; their axles, their rims, their spokes, and their hubs were all cast.